Cut depths and spindal speeds to improve finsh time

Hi, No expert, but I cut 15mm ply and 15mm mdf at 6m/min and 18k rpm using either straight or spiral 2 flute cutters and break very few. I am of course aware that I will probably be told that I'm doing it all wrong!!! G.

Quote:

---

Originally Posted by GEOFFREY

Hi, No expert, but I cut 15mm ply and 15mm mdf at 6m/min and 18k rpm using either straight or spiral 2 flute cutters and break very few. I am of course aware that I will probably be told that I'm doing it all wrong!!! G.

---

Not by me Geoffrey your cutting spot on IMO.

But what size cutter are you using?

Quote:

---

Originally Posted by deebo

But what size cutter are you using?

---

6mm cutters and forgot to add that I cut in a single pass.