Generic Chinese VFD, XSY-AT1 Programming Parameters/Settings

Quote:

---

Originally Posted by Len-Tikular

Hi all.
I'm running a 2.2Kw Vevor spindle motor. When adjusting the Pot to increase spindle rpm I'm getting Error 1 (Current Overload) and the inverter trips.
I have set all parameters to the latest list posted. Under/Overvoltage is at 220/255 P78 Main current O/load is 7Amps
Any helpers out there ?Attachment 31783

---

Just a thought have you checked the ramp speed seconds parameter

Quote:

---

Originally Posted by Clive S

Just a thought have you checked the ramp speed seconds parameter

---

Thanks Clive, what's the Parameter number for that ?

Quote:

---

Originally Posted by Len-Tikular

Thanks Clive, what's the Parameter number for that ?

---

Have you got a link to the manual

Hi people.....

Does anyone use the RS485 on this VFD???

I cant seem to find any documentation for the pinout OR the address registers and data format for this drive. Not in any of the manuals I have seen so far.