Sieg SX2 Plus build

Many Thanks for this Russell; I have one of these as a gift - long story. This is exactly what I need, but two questions: Roughly, what isthe Max height dimensions with the Z conversion fitted; and what stepper are you using to drive it.

Rob C

Total height with head in highest position is 1.07 m. I can't remember the model number of the stepper motors but they are NMEA23 size and about 80 mm long.

Russell.

Thanks,

I have enough headroom and I have Nema 24 motors 425 oz-in; I have done the screws and fitted the thrust bearings. Also have the acetal and the the Acme tap is on it way from china (20 quid). Will post when I have completed the nuts and mounted the X/Y motors and tested.

RC

Hi Russel,
I am getting ready to convert my Z and really like your design. I would like to make mine the same way.

Is there any chance that you can email me or upload the ball nut assembly dxf again? I clicked the link but it appears it is no longer valid.

Thank you, and again nice work setuo!
Dave

Hi Dave,
New link for ball nut assembly drawing: https://dl.dropboxusercontent.com/u/...llnut_assy.dxf
Not sure what happened with the old one.
Russell.

Quote:

---

Originally Posted by russell

Hi Dave,
New link for ball nut assembly drawing: https://dl.dropboxusercontent.com/u/...llnut_assy.dxf
Not sure what happened with the old one.
Russell.

---

Hi Russell, Do you still have the ballnut_assy.dfx?

Then link returns a 404 not found error on DropBox

Thanks RC

I've replied via email.

Russell

This Mega link might work:
https://mega.nz/#!uxVEmAjB!T_WqMIzQB...3zM3BP5hGmeSTk

Russell

Edit: local copy of the file can be found here:Attachment 31323