Attachment doesn't open for me ?
Printable View
Attachment doesn't open for me ?
Me neither ;)
Skickat från min SM-G955F via Tapatalk
Attachment 23437Quote:
Originally Posted by Nr1madman
try again ;)
Attachment 23437Quote:
Originally Posted by Nr1madman
try again ;)
Now I totally understand what you ment about loosing travel ;)
Skickat från min SM-G955F via Tapatalk
Thanks for the photo. Mine is similar as you said (I will post upgrade soon), but the X ballscrew is on top of the axis.
I plan to use 1605 screw for the Z axis with a 2.2kw spindle. The distance between X rails and spindle will be ~23cm.
I think, with this configuration, it will have more leverage. Is it right?
I will try to put X rails on top and bottom. Thanks for the advice ;)
Is it a good idea to replace the light 40x120 profile with
a heavy 40x160 or heavy 80x160? Z clearance will be around 150mm (5.9"). This way there will have only one plate on top of the bearing blocks to support the X axis.
Looks much better ;)
Skickat från min SM-G955F via Tapatalk
I just find time to update my design and change several thing. I hope I take into account every advice.
If you see anything wrong please let me know. Thanks.
Attachment 23728
Attachment 23729
Attachment 23730
my ballscrew isn't very straight. Could it be a problem when everything's bolted down?
Is it a correct way to adjust the space between ballscrew and plate?
Attachment 23755
Thanks