eBay router

One of these should do the trick :cool:
Attachment 29048

Quote:

---

Originally Posted by JAZZCNC

Another thing I see lurking in the back ground is where it mounts looks like there is no hole for the flange so it's sitting directly on the un-machined surface of the boss..!!:dejection:

---

Yep and there lay the creaking noise on the left hand support bearing the ball screw was binding. All the motors are the same.

If I built that machine, I would be ashamed to offer it for sale. If the gantry side were badly drilled, I would feel honour bound to make a new one. So obviously these gantry sides are cut by hand (probably not got a decent enough machine to cut whatever that is :hysterical:).

Quote:

---

Originally Posted by JAZZCNC

Thanks, Moray, Quite a lot of time has gone into this project trying to get the best machine for the lowest budget, while at the same time making sure there's profit to make it worthwhile doing. So far I'm very happy with the design and the frames are rock solid, but the profit will remain to be seen...Lol
The first batch won't be ready until Mid to late December and half of those are sold or spoken for already so the next batch if I do another, will be next year anyway.

I've also got this little beast in the line up as well which I'm going to offer up. 500 x 500 x 350 Cut. Fixed gantry which is a little different in the gantry department.! It's built like the proverbial brick Sh#t house. I'm on with this one at the moment which is spoken for and will be ready in the next 3/4weeks so I'll take a video of it to show more. Another will follow it and be up for grabs.
Attachment 28931 Attachment 28932
Attachment 28933Attachment 28934
Attachment 28935Attachment 28936 Attachment 28937

---

Jazz,

Wow this looks like the machine i've been searching for! Nothing i've found ticked the right boxes but this little fixed gantry guy would be perfect. Could you PM? Many thanks!