Printable View
After you all explained what a star was in the box it was obvious where it was when I opened it up. I have drilled a small hole near the motor connections and linked a bolt to the star so I can attached the earthed wires from the motor cable screens to it
Attachment 22416Attachment 22417Attachment 22418Attachment 22419
also popped to my best mates workshop, he has a few little toys ;-)
Attachment 22420Attachment 22421
Yep looks much better, you can see now how they resemble the other original joints more, nice job.Quote:
Originally Posted by ravihotwok
:) Mates with benefits a :semi-twins:, your plan for the control box and the earthing looks to be ok.Quote:
Originally Posted by ravihotwok
thanks very much lee, still a bit iffy but the main thing is I now know the theory behind it.
Yeah my mate does a lot of contracting to a few aerospace firms and has helped me out a fair bit with advice, nearly pissed himself when I showed him my 4 axis machine lol
Work has been crazy busy at the moment so only been able to do a little bit on the build. I have started to create an enclosure for the machine, this will consist of a sealed unit with 2 led strip light running at the top of the enclosure front to back each side. One side of the enclosure will be perspex and and front will be a hinged perspex door. There will be an extraction system installed on the side opposite the perspex. Its a very make-shift idea but it will serve a purpose I think and help keep the area as clean as possible.
I have replaced all the wood on the workbench from cheap thin mdf to 12mm thick ply wood for stability, weight and strength.
Attachment 22433
Now I have added a few coats of paint to the inside of the enclosure to aid lighting
Attachment 22434Attachment 22435
And here is the side perspex screen installed
Attachment 22436
One other issue I have is that I now have a additional power supply/controller for my 600w spindle which wont fit within my planet control box. I have decided to fabricate another box lid which will fit and attach to the top of the existing planet box. Here is the grp mould I have made so far to achieve this
Attachment 22437Attachment 22438
Nothing really that interesting and still haven't registered the license correctly since changing from the crap control box to the new one so hopefully I will be able to sort this at the weekend and make some progress on finishing the wiring. All in all enjoying the small amounts of time I spend on this so far which is great. More to come :-)
Have you had it cutting yet?
christ no lol
waiting on some more cable track to feed the limit switch cables through, also need to solder the earths onto the motor cables, trying to run the cables as separate as possible hence the additional cable track, once the enclosure is finished I can work out the exact length of the cable so they are as short as possible.
Im not too keen on firing the machine up when its half way through installation as I know I will start making loads of stuff and just make a mess everywhere lol
Spent a few mins last night installing the new LED strip lights inside the enclosure, just need to sort a switch out then they will be fully functional.
Attachment 22449