Isel CPM 3020 - run with mach3?

I am interested to buy license for kay cnc. Br : Dariosh

Quote:

---

Originally Posted by mchipser

I was able to get the X and Y axis running last night.. I will hopefully have enough time tonight to finish the Z axis.. I'm still not sure on how to setup the micro stepping and the motor velocity in mach3 (cause I don't know what values to use)

Anyway, here it is moving.. https://youtu.be/iSry6ZRe8bI

Attachment 24432

---

What model are the Stepper Motor Driver Controller you put ?

Quote:

---

Originally Posted by MarMix

What model are the Stepper Motor Driver Controller you put ?

---

The picture appears to show Stepper Online DM542Ts.

https://www.omc-stepperonline.com/di...or-dm542t.html

I have the GALAAD license so i don't know i must test if the original board on the machine it move fast enough, if is slow version, then i will update to mach3, i wait for the USB to rs232 adapter to come, to do some tests

Steppers motors are STP-57D13-01 1.8 DEG/STEP 2.5V 3.0A

Hi guys,
the subject is a little dated, but I am looking for information and especially help.
I just bought an ICP4030, same machine but bigger and more resent.
I want to do the exact same retrofit : UC400ETH + BOB + UCCNC

I am looking for information on how to wire the machine
Someone to help me ?
@mchipser ?
@Steve-m ?

Thks !!

Don't do any modifications, it works fine, i use mine with galaad and old desktop with serial port. All you do you make the design on any pc and you load and run the file from older pc with serial port connected to the machine, there is a schematic in pdf for whole pcb, if you google it, you will find it, check images and all when you google, like search type all, and images

Thks MarMix, but i'll do it.
I don't have Galaad, and I would rather pay for a UCCNC license than Galaad.
I have the pdf of the pcb, but it does not bring me anything.
I'm looking for how to identify the wires that go from the Nema to the drivers.