that looks like the one i have from them... havnt tried it powering steppers though but should be ok at 3 * 2amp max (you will rarely be at max on all 3 axis)
Printable View
that looks like the one i have from them... havnt tried it powering steppers though but should be ok at 3 * 2amp max (you will rarely be at max on all 3 axis)
awsome. just ordered it
try the psu out yet?
No mate, been away with the job, so come next weekend when i get back i will be full on it
So such a long time i have had to play with the lathe.
The new psu works brilliantly, still need to test the new board for control but the current one works very well, all spot on, no cutouts!
BUT...
I have been thinking about selling this project on.. I'm finding more of a need for a CNC Mill/Router around A3 sized bed if poss!
Stu
So yeah, this is going up for sale.
Im in need of a Smallish router/mill,
Working area 300x300x100 ideally, if anybody is interested in this, pm me and we can chat
so i now have everything working, all measurments are correct and calibrated.
just a few things i hope you lot can help with,
Emc sees the tool coming from right to left (thats ok) but from the bottom up, and my tools come from the top down...
the other issue im having is cad/cam for emc lathes :(
Stu
You just need to change the direction for the axis in stepconf (check the "invert" box next to the direction pin on the parallel port setup page).Quote:
Originally Posted by cooliced
Thank you mate
Just to update you all and ask for a little help,
I have got the Spindle v3 DC/DC board from DIYCNC.. i dont wanna mess wiring this up!
Can somebody give me a little direction how to wire it to the existing hardware..
Thanks for any help
Stu