OmioCNC X6-2200L-USB with PC, Pendant, Probe and more (can sell items individually)

NOTE, This item is now back up and I am accepting offers!


Accepting offers on my OmioCNC X6-2200L-USB
https://www.omiocnc.com/products/x6-2200l-usb.html

Pretty good condition though will need trimming back in.
Has had a few hours on it but has been kept in a nice condition.
No crashes. Always used coolant with anti-corrosive.

Can include or sell separately;
-A working PC with Mach3
-Handwheel MPG Pendant HB04 wired
-TPA2 touch probe https://www.kurokesu.com/shop/TPA2
-5L Envirocut SE10 CNC coolant (90% full)


Shipping
Ideally, you will pick this up. But I do have the original packaging so can dismantle and pallet this. Pallets are around £60 to £100. Hard to say without packing it all up.
Can also post courier in separate boxes. Expect a higher price than a pallet...


Photos in the post below.
PM offers in the region of £2500-3000.

where are you?

Quote:

---

Originally Posted by Richard

where are you?

---

Derby

Sorry they are not great. Access is not great atm with storing so much stuff in work shop.
And there are a load of chips.

https://s15.postimg.cc/xwjwamtnf/IMG...823_194629.jpg

https://s15.postimg.cc/intyww2jv/IMG...823_194635.jpg

https://s15.postimg.cc/6ypz8z1bf/IMG...823_194647.jpg

https://s15.postimg.cc/vrzj9lx6j/IMG...823_194709.jpg

https://s15.postimg.cc/mwyoz3ntn/IMG...823_194804.jpg

Please could you email me on about this and your other item as I am unable to PM you, unsure if its me being thick or my low post count!!!

thanks

Nick

Hello Jogara
Is your machine still for sale? I had started a build with support from forum members but the support seems to have come to an end. Your machine looks like something I was hoping to build so maybe it will fit the bill. Look forward to hearing from you.
Jim

Quote:

---

Originally Posted by jimchelt

Hello Jogara
Is your machine still for sale? I had started a build with support from forum members but the support seems to have come to an end. Your machine looks like something I was hoping to build so maybe it will fit the bill. Look forward to hearing from you.
Jim

---

Potentially still up for sale if the offer is good.

Feel free to PM me.

Quote:

---

Originally Posted by jimchelt

Hello Jogara
I had started a build with support from forum members but the support seems to have come to an end.
Jim

---

What do you mean by this, as looking back over your posts you have had plenty of help and advise.

Hi, is your machine still for sale? if so, please can you email me on [email protected] to discuss. Thanks

Hi, is the cnc mill still for sale? Eppie.