How about a mycncuk cnc router project?
I have been reading through the various build logs, and comments about various designs, and it would seem to me that many of the comments about shortcommings are very similar.
Would it not be a good idea to design a basic machine incorporating the best features with the idea of encouraging more people to try their own build?
I realize that many people will say a standard design would not suit their needs, but I have read several times that the first machine is a starter and will be improved on their next project.
After a basic design concept, ie size, table top, floorstanding, materials to cut etc. I feel sure that the most experienced members could all comment on exactly what the machine should be and come up with a design better than anything else on the market--remember strike cnc!!
The machine could carry smart union flag decals(or other sponsors decals) and be built from supplied DXF? drawings.
A parts list could be supplied and some machined parts could be offered for sale by experienced site members
Any thoughts, G.
Re: How about a mycncuk cnc router project?
great idea, but this lot will never agree on anything.:friendly_wink:
Re: How about a mycncuk cnc router project?
Round One, FIGHT! :yahoo:
Sorry could not help it.
Re: How about a mycncuk cnc router project?
goes to find the popcorn :yahoo:
Re: How about a mycncuk cnc router project?
EPOXY!!
Sorry, couldn't help myself.
Re: How about a mycncuk cnc router project?
MDF, so it's cheap and easy to make.
Re: How about a mycncuk cnc router project?
Quote:
Originally Posted by
i2i
great idea, but this lot will never agree on anything.:friendly_wink:
Sorry dont agree with that.!!. . .:joker:
Re: How about a mycncuk cnc router project?
Quote:
Originally Posted by
D.C.
EPOXY!!
Sorry, couldn't help myself.
Quote:
Originally Posted by
Tenson
MDF, so it's cheap and easy to make.
See why it won't work.? Already had 2 hard to work with or unsuitable material suggestions and we haven't even gone near design yet . . lol
Re: How about a mycncuk cnc router project?
Thats a pity Jazz, I thought you would have some of the best ideas!!G
Re: How about a mycncuk cnc router project?
Quote:
Originally Posted by
Tenson
MDF, so it's cheap and easy to make.
easy.. maybe, accurate.. depends how much effort you put in. if you are talking about torsion boxes in every place there needs support your talking a lot of effort, is it cheaper maybe.. one sheet of 18mm mdf is £17, 25mm £24 so yes even if you go for 25mm it seems quite cheap. how big are you going to have to make torsion boxes to make sure the strength is there and in turn how much bigger are you going to have to order your screws and rails to achieve the cutting area you want? i plan to make my machine using no more than £100 worth of steel... to me that seems cheap, i havn't even looked at alu but that fact i'm using steel is allowing me to have quite decent amount of cutting area from smallish screws compared to if you made an mdf machine. also there are plenty of designs out there already that use wood/mdf if it was really that good everyones machines in this forum would be made from it, i only know of 2 guys who have made from wood/mdf and one of them ran away from the forum after i presume all the disagreements everytime he mentioned doing something from wood as an alternative
talking of cutting area.. this is what decides the design.. you cant really be universal as everyones needs for cutting area are different.