Various small CNC machines - ISEL/Unimatic

Hi all,

I am posting this on behalf of someone else, I actually I bought my machines from him as it was part of a business clearance/liquidation. I have limited details on the machines as I have only viewed them briefly I really cannot vouch for their current condition. What I can say is that these machines are all of a very solid construction and if I were planning a first build I would certainly consider one so that the lion share of mechanicals were already complete. All I can say is that I purchased a few machines from this guy (I was planning to build one) and they were great. I re-fitted the controllers because ISEL ones are a bit naff and they are up and running.

If you see a machine of interest don't ask me how much for it - tell me how much you would pay for it as a 'Punt' (punt defined as "if the machines were a bit rubbish and needed a refurb it would still be a good price"). This is how I bought my machines and two had no issue but one I had to strip, clean and refurbish. Even with that effort it was still worth what I paid.

Not sure if they will have the spindles attached - they are the kind of thing that might have disappeared.

Sorry for not being very helpful - but I am just the messenger!

http://i1006.photobucket.com/albums/...h_IMG_1502.jpg

I think this is about 200x150mm (really don't know) but I am pretty sure it is meant to have the indexer that is stuffed in the CPM below.

http://i1006.photobucket.com/albums/...h_IMG_1506.jpg

ICP 2015
200 x 150 x 90mm

http://i1006.photobucket.com/albums/...h_IMG_1507.jpg

CPM 2018
200 x 150 x 90mm

http://i1006.photobucket.com/albums/...h_IMG_1512.jpg

UNIMATIC SYSTEMS
MODEL EP 1090
Possibly these dims 310 x 420 x 90 mm (info is sketchy)

Where are these machines located?

They are in Swindon currently.

How did you find them? Can you offer contact details?

Quote:

---

Originally Posted by badgerman

Hi all,

I am posting this on behalf of someone else, I actually I bought my machines from him as it was part of a business clearance/liquidation. I have limited details on the machines as I have only viewed them briefly I really cannot vouch for their current condition. What I can say is that these machines are all of a very solid construction and if I were planning a first build I would certainly consider one so that the lion share of mechanicals were already complete. All I can say is that I purchased a few machines from this guy (I was planning to build one) and they were great. I re-fitted the controllers because ISEL ones are a bit naff and they are up and running.

If you see a machine of interest don't ask me how much for it - tell me how much you would pay for it as a 'Punt' (punt defined as "if the machines were a bit rubbish and needed a refurb it would still be a good price"). This is how I bought my machines and two had no issue but one I had to strip, clean and refurbish. Even with that effort it was still worth what I paid.

Not sure if they will have the spindles attached - they are the kind of thing that might have disappeared.

Sorry for not being very helpful - but I am just the messenger!

http://i1006.photobucket.com/albums/...h_IMG_1502.jpg

I think this is about 200x150mm (really don't know) but I am pretty sure it is meant to have the indexer that is stuffed in the CPM below.

http://i1006.photobucket.com/albums/...h_IMG_1506.jpg

ICP 2015
200 x 150 x 90mm

http://i1006.photobucket.com/albums/...h_IMG_1507.jpg

CPM 2018
200 x 150 x 90mm

http://i1006.photobucket.com/albums/...h_IMG_1512.jpg

UNIMATIC SYSTEMS
MODEL EP 1090
Possibly these dims 310 x 420 x 90 mm (info is sketchy)

---

I am new to this forum so don't know if one can postmark direct // email.

I am very interested in one of these units and would like to pop up and take a look if possible (I live in dorset and am currently working in N Dorset)

Happy to give you my mobile number if that helps.

Egret

Hi all, sorry for being a bit slow responding you all. I have been a bit busy! I will ring the owner tomorrow with all your requests and see of we can arrange something.

Apologies people, I have tried contacting the owner of the machines and have had no response. I appreciate that this probably doesn't inspire much confidence!

I will keep trying.

Keep me posted!

100 quid for the bottom one

am interested if they are still available