Anyone have a UK source for open ended 10mm T5 Polyurethane belt
Hi,
I have a need for around 7 meters of open ended (i.e. off the roll) 10mm wide T5 Polyurethane belt. I have found a US source at a sensible price, see here http://shop.polybelt.com/10T5-Open-E...-B10T5-MPS.htm but unfortunately no shipping to the UK. Does anyone have a sensibly priced UK source they have used ?
Cheers, Cam.
Re: Anyone have a UK source for open ended 10mm T5 Polyurethane belt
hi cam
have looked for open ended timing belt in uk before , and could only find this, its not t5 http://www.motionco.co.uk/timing-bel...-25_38_49.html
Re: Anyone have a UK source for open ended 10mm T5 Polyurethane belt
cam
another option is here not open ended belt but couldnt you get a long belt and cut it http://www.bearingboys.co.uk/Timing_Belts-1039-c
Re: Anyone have a UK source for open ended 10mm T5 Polyurethane belt
Re: Anyone have a UK source for open ended 10mm T5 Polyurethane belt
Might be worth being a bit careful. This was on that web site.
Codan Rubber Limited – In Administration
Thursday 18th February 2010
The affairs, business and property of the company are being managed by the Joint Administrators who act as agent for the company without personal liability
G P Bushby and M Wild are licensed to act as insolvency practitioners in the UK by the Institute of Chartered Accountants in England and Wales (IP numbers 8736 and 9300 respectively)
Re: Anyone have a UK source for open ended 10mm T5 Polyurethane belt
Thanks for the links, unfortunately I can't cut a belt because I can't find one long enough. I need an axis travel of 1 meter, therefore I need a belt just over 2 meters. The http://www.roulunds.co.uk/ web site looks the best, but the price is still much higher than the US one. I think I may contact the US guys and see if they are prepared to ship to the UK. I will let you know how it goes.
Cam.
Re: Anyone have a UK source for open ended 10mm T5 Polyurethane belt
Mel
Just to clarify was it MOTIONCO that is winding up? as there it where i am getting my belt from for my build.
TNX
Re: Anyone have a UK source for open ended 10mm T5 Polyurethane belt
I think it was http://www.roulunds.co.uk/ they have Codan plastered all over their web site.
Re: Anyone have a UK source for open ended 10mm T5 Polyurethane belt
Re: Anyone have a UK source for open ended 10mm T5 Polyurethane belt
Sorry. I should have made it clear. On the Roulunds web site it shows the history and they are Codan one and the same. I cut and pasted direct from http://www.roulunds.co.uk/ .
Re: Anyone have a UK source for open ended 10mm T5 Polyurethane belt
No reply from the USA but I found a UK source at very similar prices. http://www.transdev.co.uk/
Re: Anyone have a UK source for open ended 10mm T5 Polyurethane belt
No reply from the USA but I found a UK source at very similar prices, http://www.transdev.co.uk/
Re: Anyone have a UK source for open ended 10mm T5 Polyurethane belt
Quote:
Originally Posted by
cweeks
Hi,
I have a need for around 7 meters of open ended (i.e. off the roll) 10mm wide T5 Polyurethane belt. I have found a US source at a sensible price, see here
http://shop.polybelt.com/10T5-Open-E...-B10T5-MPS.htm but unfortunately no shipping to the UK. Does anyone have a sensibly priced UK source they have used ?
Cheers, Cam.
not sure if I'm doing this correctly as it's my first. I've used http://www.beltingonline.com/ they seem to have a wide range of belts puppies and a calculator to find out how much it will cost
Mick
Re: Anyone have a UK source for open ended 10mm T5 Polyurethane belt
Wow Mick that thread is 6 years old !
I know its a typo but it made me chuckle that they sell puppies
Re: Anyone have a UK source for open ended 10mm T5 Polyurethane belt
sorry about the puppies, looks like I have my dyslexic fingers on today.
I'll also look at the date next time. this is my first attempts at joining in a forum. therefore, a few bits to learn. glad to have given some one a chuckle though.
Mick
Re: Anyone have a UK source for open ended 10mm T5 Polyurethane belt
Quote:
Originally Posted by
MickS
sorry about the puppies, looks like I have my dyslexic fingers on today.
I'll also look at the date next time. this is my first attempts at joining in a forum. therefore, a few bits to learn. glad to have given some one a chuckle though.
Mick
Hi Mick welcome to the forum don't worry I think you will find a friendly bunch of sarcastic experts on here all willing to help in any way they can:friendly_wink:
Re: Anyone have a UK source for open ended 10mm T5 Polyurethane belt
Welcome to the forum Mick. In my view it's one of the best forums on the web!
.
Andy
Re: Anyone have a UK source for open ended 10mm T5 Polyurethane belt
Yes Welcome Mick no harm meant
Re: Anyone have a UK source for open ended 10mm T5 Polyurethane belt
Quote:
Originally Posted by
routercnc
Yes Welcome Mick no harm meant
That will teach me to post after a few bevies, sarcastic was not meant in any way personal to anybody:cower: