Printable View
Hi Everyone just like to give you information regarding a Denford Triac VMC that is for Sale the miller is a machine that was bought for my son but unfortunately he has changed jobs and no longer has the time to Upgrade to a Mach Three so the machine is now for sale.
If anyone is interested could you please let me Know.
Pics / location / cost?
Pics / location / cost?Quote:
Originally Posted by sheffstaff
Hi there the location is Sheffield price is £2500.00 ono and i have some photos that i will upload as soon as i can.:apathy:Quote:
Originally Posted by Chaz
Attachment 19099Attachment 19096Attachment 19097Attachment 19098
Photos of miller as requested
Just wondering if anyone is interested in the Denford Miller I would consider sensible offers.
You are asking a lot of money for an old machine and from the look of it,not in the best condition.
This machine was bought to be used not to look nice, also with the intension to upgrade to Mach 3 if you would like to make an offer I would gladly consider this.Quote:
Originally Posted by terry1956
Value is proportional to what someone believes its worth. I was going to post some feedback on the price but someone beat me to it.Quote:
Originally Posted by sheffstaff
If something doesnt look like its been cared for, then there will be questions about how the item has been used (and/or abused).
So taking a £2500 risk hoping for the best is crazy.
Plus, let's put some things into perspective. These Denfords make nice DIY machines however, yours has the 6 ATC instead of the 8 ATC, has the top flood coolant instead of the full tank coolant and looks as scruffy and abused as hell. It will need a fair bit of work, likely a retrofit and this all adds up.
Sorry but this is not a £2500 machine. If you disagree, no problem. Probably explains the lack of interest.
For reference, mine was bought for similar money and was in a lot better condition. I needed to retrofit it but it was worth it as the machine was clean and had only seen light use.
Entirely up to you. It might be worth considering to break it. If you did, Id be interested in some parts for my new mill.
How does the Triac compare with the Easimill 3?
Thank you for your opinion I really appreciate this I must say however the machine has not been used and abused and you are quite correct about the ATC being a six but was not instead of eight this is how it was bought.
If anyone would like to make sensible offers they will be considered the machine will not be broken up and it was always going to have a retrofit so if anyone would like a Denford miller this is an ideal project for the winter.
http://www.denfordata.com/bb/Quote:
Originally Posted by Colin Barron
Worth a look there.
Quote:
Originally Posted by Chaz
i wondered if anyone had used both and could give a comparison.
I watched a few vids on utoob to see if I could help but no easy way for me to compare (as a Triac owner), sorry, hence the BB board which has stats / specs etc.Quote:
Originally Posted by Colin Barron
What is the best you can do on it. thanks steve.Quote:
Originally Posted by sheffstaff
is it still for sale.
Hi, do you have “baldor D281 motion control card for a triac P. C. (denford), red 7-segment LED display type. The firmware is ESMINT 3.28 V1.6H/S - JD5.”Quote:
Originally Posted by sheffstaff
Sorry all the miller is no longer for Sale
Hi,
I know this thread is long in the tooth,
Do you still have the Denford Triac VMC available?
Cheers,
Lee 07522020888
Which part of 'its no longer for sale' was unclear? Are you hoping they pulled the ad deciding not to sell?Quote:
Originally Posted by alexall
Sheffstaff most definitely doesn't have it for sale anymore.