Unimat 3 Lathe CNC Converted
Re: Unimat 3 Lathe CNC Converted
Hardware:
Nema 17 1A motors.
2A drivers. Cnc board: Arduino Uno + Cnc Shirld 3.0.
Software:
Universal Gcode Sender Platform
Cambam 0.98https://uploads.tapatalk-cdn.com/201...c377545f9a.jpghttps://uploads.tapatalk-cdn.com/201...6b12b7c049.jpghttps://uploads.tapatalk-cdn.com/201...bb63ff8643.jpg
Wysłane z mojego SM-G935F przy użyciu Tapatalka
Re: Unimat 3 Lathe CNC Converted
How much and where are you?
Sent from my iPad using Tapatalk
Re: Unimat 3 Lathe CNC Converted
Quote:
Originally Posted by
scooterist007
How much and where are you?
Sent from my iPad using Tapatalk
Lancashire / Darwen
£350 without conversion.
+£70 with conversion.
Cnc conversion is just experimental. No end stops, No homing.
Lathe in action:
https://www.youtube.com/watch?v=rTkYJe1UMoc
Re: Unimat 3 Lathe CNC Converted
If you are open to offer I would be interested. Pm me. Michael
Re: Unimat 3 Lathe CNC Converted
What is the working area size for this machine? Looks tiny but from the vids it actually looks reasonable.
Re: Unimat 3 Lathe CNC Converted
Its about 180mm between chuck and tailstock.
Wysłane z mojego SM-G935F przy użyciu Tapatalka
Re: Unimat 3 Lathe CNC Converted
Re: Unimat 3 Lathe CNC Converted
Is this machine still up for sale if so can you please contact me. ASAP Thanks
Re: Unimat 3 Lathe CNC Converted
Is the system sold
if not
what exactly is included or better what do I need myself to have this system running (PC, license for software driver , etc) if I bye £350+£70
Can You send it to Sweden ?
Best Regards
Lars
Re: Unimat 3 Lathe CNC Converted
i like to buy it, with whats shown with sotfware. totally new to this. help
