CNC Router 1300mmx1300mmx150mm working area

For Sale CNC Router 1300mmx1300mmx150mm working area

Self Build with much help form JazzCNC on here, for personal reasons has not been used much (a few hours). Comes with Computer with Mach installed and Custom made work bench. Bed is busboard and 18mm MDF.

Tested to commission stage but will require some calibration and final setup

1700mm x 1450mm x 850mm
1300mmx1300mmx150mm working area
Kress 1050 FME spindle
25mm x12mm pitch ball screws and fully supported rails
150mm travel on the vertical z axis
Rigid Aluminium Frame from section and plate
Full pc & monitor with mach 3 pre installed
Nema 3.1NM motors with stepper drivers and power
Custom Made workbench included
Supply not enclosed
Cabling requires boxing
Some calibration required

Please PM me with sensible offers Please

Could i ask a rough estimate on what you would like im not very good with offers.

Thankyou

Hi There Yes it is still for sale I've sent you an email

Have you sold this yet, if not can you send me more detail please including a rough price your looking for and area it is to be collected from.

thanks

Paul

Hi Paul
I've PM'd you

Hi! If machine still unsold please send me your price and location. Thank you

hi , is this still available?

Hi yes it is still for sale but have had quotes from 2 companies who deal with cnc machines, and parts ect and both have offered quite good prices for it, I am just waiting to hear back from them, also would like to try finish my conversion first before I sell this part.

Hi There yes it is PM me for details thnx

thanks for replying, can you pm me with your price and where you are please? cheers

.

Quote:

---

Originally Posted by DiGi5670

Hi yes it is still for sale but have had quotes from 2 companies who deal with cnc machines, and parts ect and both have offered quite good prices for it, I am just waiting to hear back from them, also would like to try finish my conversion first before I sell this part.

---

so do you have a cnc for sale as well as bigstu67? whats the details on yours?

no sorry got 2 of my ongoing threads mixed up deleted comment now hopefully, sorry for confusion, I was just selling a Dahlgren serial controller.

:thumsup:

Hi Stu
Is your CNC still for sale? I had a lot of help from JazzCNC when building my control unit. Unfortunately the gantry that he had hoped to build for me never materialised, hence my interest in yours. I'm in Cheltenham so not too far away. If it is for sale a ball park figure would be helpful.
Hope to hear from you.

Jim

Sorry Jim it was sold quite a while ago