Printable View
Best Wishes and Seasons Greetings to all. Here's hoping Santa has been kind and delivered all the goodies you asked / dreamed for.
If you should by chance partake of a little too much Christmas :beer::beer::beer: Cheer, may your hangovers be slight.
My thanks to Lee and Irving for keeping things running smoothly and to everyone for the encouragement, knowledge and humour that makes this place what it is.
Tim
Merry Christmas to all and a Happy new years CNCing
BAAAAARRRR Humbug!! :)
ok ill go with that, id be buggard without forums like thisQuote:
thanks to Lee and Irving
cheers to everyone for all the help n advice xxxxxxxxxxxxxx
Seasons Greetings to all and thanks for the kind words... its a labour of love :lol:
Happy Christmas all and promise to make much merrymaking and not swarf ....
im having none of that !! im just about to start drilling my bed plate... the beer can wait !!Quote:
and not swarf ....
Happy New Year,
and a belated merry Christmas :smile:
I would like to wish all MYCNCUK members a very Merry Christmas
and also with out your help I would be a failing father to my son.
thanks to all that have helped with the Luke11cnc it will NOT be a project collecting dust in the corner of the garage but making lots and lots of it's own dust
again a humble thank you and a Merry Christmas to all
James:smile::smile::smile::toot::toot::rofl::rofl:
Meryy Xmas mate.
Tom
James. from what I've seen of your project in your posts here, you're doing something absolutely awesome with your son.
What ever stage you've reached with your project, you've got there by your willingness to take the first steps, having the courage to ask for help when you needed it and not letting pride get in the way of putting that help to good use.
With or without a finished project, it already sounds like you're making a fine rolemodel!
Merry Christmas :)
Merry Christmas everyone !
Just wnted to wish everyone on her a merry christmas and hope you all get what you want.
Merry Christmas mate, santa has been !!
Bah Humbug.............
Her agent said "no". I can only guess it's because she didn't want to fly all the way out from Los Angeles :cry:Quote:
Originally Posted by johngoodrich
On behalf of me and the staff, I would like to thank you all for your support over these past 12 months and your continued effort to contribute, help others and in making the forum the successful place it really is. We look forward to the New Year and what it will bring, we hope you do to!
I would like to especially send out love and thoughts to Irving2008, as some of you know he has been through a near fatal accident recently and while this could never be convenient for anyone it certainly would have been more convenient a little further away from this time of year.
Please if you will, raise a glass with us this year to Irving and wish him the fastest and best recovery he can make xx :beer:
Wishing all of you a Merry Christmas and a prosperous New Year! :beer:
Warm Regards,
The Staff @mycncuk
Cheers Lee, greetings to you and your staff and of course special thoughts for Irving.
I have only been a member for a few weeks, but have enjoyed reading about the projects and help given by the members.
Regards, G.
My sentiments exactly, merry Christmas and a drunken new year to all when it comes.
alex
Merry Christmas you old bar-stewards :)…. What happened to the end of the world?... sod it, I guess we will just have to crack on.
Here’s hopping that you all make a million in 2013 or finish building that cold fusion reactor or whatever the hell it is that you have been plotting
Love Love Love xxxxxxxx
Raises cup of tea to Irving, hopefully I'll start and finish this bloomin cnc machine next year Mark!
Yep as has been said already, thanks to those who have helped me during 2012 & may you continue to help me in 2013 lol
Best wishes for Christmas & a healthy & prosperous 2013 to all.
lmao......Quote:
Originally Posted by martin54
Merry Xmas every body and Happy CNC'ing.
Tiz the Season to get jolly so try to be good and stay sober.!!. . . No promises here thou. :encouragement:
BAH Humbug !
Nowt' but an excuse to over eat & drink that stuff that makes me as wobbly as an MFI wardrobe.
Have a guddun :encouragement:
P.S. I promise great rewards for any aspiring engineer who can invent a usable set of nut crackers that don't stress fracture within the Xmas period.
Oooo now there's a challenge!, ill start the ball rolling...Quote:
Originally Posted by Chas
Should be a desktop unit, you walk up, place your nut, press the button, nut exposed.
Who's Next:
ME: . . . . It's called a Hammer.!! . . It doubles for toffee as well .. KISSQuote:
Originally Posted by Lee Roberts
merry christmas to you all thanks so far for all the help and hopefully i'll be able to return the favors in one way or another in the future.
and i'll raise a special glass of loopy juice to irving.. keep fighting dude!
Merry Christmas everyone, After a long lull here's to hoping I can building something CNC related during 2013:friendly_wink:
And of course all the best to Irving :beer::beer:
Merry Christmas you all .. hope next year is a good one for you all as well :)
Happy christmas everyone. Keep your ballscrews tight and where they belong. G
A very Merry Christmas to my new family, yep! you lot are that close to me. I joined this site this year and already its my favourite. Its the first one I visit when I switch on my laptop. Looking forward to all the changes Lee has proposed, and hoping to get chipping in 2013.
Also prays go out to Irving and hope 2013 gets him up and running again.
Today's the day you have an excuse to eat loads and drink loads.
So Cheers Adil
Merry Christmas to everyone and especially the guys who run this forum, those who have helped me with my machine and especially Irving.
I also hope everyone has a good New Year creating things on their CNC machines...may your gantries never flex and your tools never chatter.
Off to cook the dinner now in an imitation of the late Keith Floyd...
Cheers
Chris
Aaaaaw, that's such a nice thought!Quote:
Originally Posted by Washout
Seasons Greetings everyone.... And take it easy on the sprouts ;-)
Cheers,
Andy
It will need:Quote:
Originally Posted by Lee Roberts
1- Carbon fibre
2- A truss
3- Lashings of epoxy
Sounds like a good mycncuk challenge for xmas 2013 project threads, who can build the best nutcracker?
Merry christmas one and all, why aren't you all too drunk to type yet?
http://www.youtube.com/watch?v=sB1-axKPmSM
Surely a decent wall and miniature trebuchet milled from aluminium would do the trick? ;-)
I spent all Christmas day making helical splines. After about 6 attempts I finally got one that was only slightly stiff to start with and bedded smooth in short order. This is printed in ABS with a 0.15mm (0.006") layer thickness.
I am having so much fun making things I would never have thought possible I am wondering if this 3D printer might actually be better than sex.
OTOH my memory of sex has faded over the years so I could be wrong :frog:
Although I doubt you'll ever see one on Thingiverse, I'm fairly sure that a good few BBC's have been created !Quote:
Originally Posted by Robin Hewitt
I've decided to get a RepRap kit. If I ever manage to get it working then I'll upgrade to a Form1 if/when they hit the market. I have nephew I can offload the RepRap onto, he's only 8 but already beats me on the Teknologie side of life.
Could I make a long lasting nut cracker on one I wonder?
It is popular so the support should be good. Seeing as how you are on this here site I reckon you wouldn't find it hard to improve on the design :whistle:Quote:
Originally Posted by Chas
Does it have a heated bed? I'm thinking of lagging the bottom of my bed to stop it dumping too much precious heat before it can get to the edges.
Just a quicky to say Merry Christmas and a happy cnc'ing new year to you all!
Only 2 more sleeps and santa will have been...woop woop lol
.Me
And a merry Christmas to all too!
Thanks to every one for all the time help and patience this year on geting me from a pile of bits to a almost fully working machine. I promise to be less of a pain in the ass next year. I hope every one has a great day tomorrow and gets a few toys for the work shop too.
seasons greetings
charlie