Jiachen 1216 router Help ?
Hi Guys
I have just bought a Jiachen 1216 without computer and any idea how to run it.
Is there anyone out there that can help me firstly with any information about the machine itself, I've tried to email company but just got a bounce back email.
I need any info such as pdfs etc to help understand it a bit more and also what the machine can achieve.
Also will this run off mach3 / vcarve software ?
I have a smaller cnc which I run off the above and know how to use so would be handy if could use same software.
The machine also comes with hand controller, I've never used one before and wouldn't know how too without learning the basics first.
I live in South Wales does anyone know a good CNC service company local ?
I will upload pics if anyone can give any guidance I would be very grateful.
https://uploads.tapatalk-cdn.com/201...e66d495caa.jpghttps://uploads.tapatalk-cdn.com/201...372946c74a.jpghttps://uploads.tapatalk-cdn.com/201...e16762c49c.jpghttps://uploads.tapatalk-cdn.com/201...da9708f8db.jpghttps://uploads.tapatalk-cdn.com/201...b190318740.jpghttps://uploads.tapatalk-cdn.com/201...9638895592.jpghttps://uploads.tapatalk-cdn.com/201...afeb6565a6.jpghttps://uploads.tapatalk-cdn.com/201...412b8cf299.jpghttps://uploads.tapatalk-cdn.com/201...d597f28d9c.jpghttps://uploads.tapatalk-cdn.com/201...3f780395ef.jpg
Sent from my SM-G965F using Tapatalk
Re: Jiachen 1216 router Help ?
I'd probably just look at teh drivers, scrap whatever control system is there and do a retrofit, cant be too difficult. The boards seem well marked, probably a good setup for an Acorn or Mach retrofit.
Re: Jiachen 1216 router Help ?
Quote:
Originally Posted by
Chaz
I'd probably just look at teh drivers, scrap whatever control system is there and do a retrofit, cant be too difficult. The boards seem well marked, probably a good setup for an Acorn or Mach retrofit.
Thank you Chaz, I have another smaller machine with stepper control box too. I run Vcarve and Mach3 - would it just be a case of I could use that to run this machine and bypass the DSP ?
Sent from my SM-G965F using Tapatalk
Re: Jiachen 1216 router Help ?
Re: Jiachen 1216 router Help ?
Quote:
Originally Posted by
phill05
PM sent
Phill
Offer to fix it?
Re: Jiachen 1216 router Help ?
Quote:
Originally Posted by
Chaz
Offer to fix it?
Hi Chaz,
No only supplied the DSP manual and some other files.
We changed from DSP to Mach 3 a few years ago so were no longer needed.
I am currently trying Acorn, after a problem setting it up I now have it test running 4 axis for a router / mill and also have the lathe side running it will be made into a portable unit to take to other machines when complete.
Phill
Re: Jiachen 1216 router Help ?
Sorry, what is DSP in this case?
Re: Jiachen 1216 router Help ?
The DSP is the hand held controller to power this machine.
Re: Jiachen 1216 router Help ?
Quote:
Originally Posted by
phill05
The DSP is the hand held controller to power this machine.
Ah ok thanks.
Re: Jiachen 1216 router Help ?
Re: Jiachen 1216 router Help ?
Quote:
Originally Posted by
Turna
Have seen some n ebay couldn't be further difference on price,
https://rover.ebay.com/rover/0/0/0?m...2F112549134648
And this
https://rover.ebay.com/rover/0/0/0?m...2F291980216229
Any suggestions?
Sent from my SM-G965F using Tapatalk
Re: Jiachen 1216 router Help ?
Here is a contact in Germany for motors and drivers that offer a brilliant service, 2 days from order items are with you.
http://de.act-motor.cn email for Merle:
Phill
