Hi I'm Rob
I'm looking into building a DIY CNC router. The more I look into it, the more I realise how much work there is to get it right.
Printable View
Hi I'm Rob
I'm looking into building a DIY CNC router. The more I look into it, the more I realise how much work there is to get it right.
Hi Rob and welcome to the site. Some basic understanding and common sense will get you a long way, but like anything there is nearly right and good and the difference can be quite small... lots of help and info here to bridge that gap :lol:
Hellow Rob , I too am building my first cnc roughter , well I am acutaly going to build 2 LOL so yes getting all the details right first time is going to be inportant . I am just getting all the parts together before I start the first one , got 4 axis board and motors from wanti in china after some reserch they are actualy one of the main makers of this stuff and so far great to deal with
Going to build a 2ft x 4ft and if that works out ok going to atempt a 5ft x 10ft . I have a workshop and plenty of space and I am a furniture maker so the workshop is set up for wood , so I am mainly going to build them from wood . I live in burnley and the shop is village pine nr water foot may be we can get our heads together and colaborate?
Chris
Hi Chris,
I'm planning on building a 2ft x 3ft router/miller. Already bought a Gecko G540 4-axis stepper controller/driver. Going to be using 2 motors/screws on the gantry for extra rigidity, other than that I'm trying to keep it really simple so I can actually make the thing. Going to make the frames out of aluminium profile.
I've just this minute emailed linearmotionbearings2008 on ebay for a quote for all the linear guides and ballscrews.
Sure if we can help each at all then that's great. I live in Burnley, on Woodgrove Road.
I just had a look at your website. I can see why you might have use for a 5x10 foot router!
Rob
haha! more Burnley rough necks :eek: splendid
i was super carful and spent lots of time on the design, i only have limited tools and i couldnt afford to start improvising half way through the build... after much research and creaitive thinking i played it safe and went for the tried and tested classic simple designQuote:
The more I look into it, the more I realise how much work there is to get it right.
good choice, exspensive but a safe betQuote:
2 motors/screws on the gantry for extra rigidity
good luck:smile:
Wise wordsQuote:
Originally Posted by blackburn mark
Phil
Thanks Mark,
It's good to know that what I thought about the gantry wasn't a waste of time. I tried discussing it with the wife but strangely she just isn't interested.
welcome Rob in Burnley good guys on here.
sorry had customers in shop , least got a 2 sales to keep the wolf from the door
yo chris... i set off to yours the other day but you werent answering your phone (guessed you were having an extra hour in bed)Quote:
Originally Posted by h4ppy-chris
ill catch you another time :)
I am planning to build mostly from wood , as i am a cabinate maker the base is a work bench to me to house all the electric bits , hopefully the computor , extractor ect it might as well be a strong kitchen cabinate design even with a laminate kitchen worktop as 40mm worktop is about as strong as owt else