Greetings all
A Denford Micro Router is showing on ebay and as it is a short drive from my location i was thinking of having a bid, has anyone got anything good or bad to say about this machine
Denford CNC MicroRouter | eBay
Regards
Mekanik
Printable View
Greetings all
A Denford Micro Router is showing on ebay and as it is a short drive from my location i was thinking of having a bid, has anyone got anything good or bad to say about this machine
Denford CNC MicroRouter | eBay
Regards
Mekanik
Had one very similar to that at school. It's fine for cutting woods and plastics, but if you need to cut aluminium then you want something stronger. It's certainly worth the £150 starting bid.
Ha ha that wasn't clever posting the Ebay link John S or i2i will be in there like a shot.!!
Haha, already saw it earlier. If you don't win that one i have one with a vac table and extraction unit.Quote:
Originally Posted by JAZZCNC
Eh eh but What he's not telling you is it will have an extra zero on the end. . .LolQuote:
Originally Posted by i2i
Better than the extra two zero's if you buy it from Denford!Quote:
Originally Posted by JAZZCNC
Another one here, but £900 starting price !
they normally go for around £1000
Which is about £850 more than they are worth.
And thats if price of scrap is up hey John. . . :hysterical:Quote:
Originally Posted by John S
if you compare them to what's about new, they compare quite well and are probably still a better buy.
Thanks Guys
GBP 1000 is a little steep for a dabble into the wonderfull world of CNC, comments apprecited
Mekanik
Can't do it properly or with much justice for much less.!!Quote:
Originally Posted by mekanik