1 Attachment(s)
SBR 20 supported round rails and bearing blocks
http://www.mycncuk.com/attachment.ph...id=14023&stc=1
Hello everyone I have some unused SBR 20 supported round rails I'd like to sell (each with two bearing blocks as pictured).
The sizes are:
2 x 360mm
2 x 1000mm
2 x 1500mm
With 12no. bearing blocks to go with them. The photo above is of the one I have out(360mm), the others are boxed up in the loft, but I can get them down and photograph them if anyone shows any interest. In-fact there is a picture on my build log of when I unpacked them I think.
These cost me about £130 from Linearmotionbearings2008 / Chai in China (not including import duty) and another £130 for postage for these and four ball screws bought at the same time.
As they have never been used I'm looking for sensible offers....
I'm not sure how much they would cost to ship within the UK. It would probably be best to pick them up from me in Birmingham.
1 Attachment(s)
Re: SBR 20 supported round rails and bearing blocks
Attachment 14036
The above referenced image for anyone who is interested.
Re: SBR 20 supported round rails and bearing blocks
Are the ball screws included
Re: SBR 20 supported round rails and bearing blocks
I'm afraid not - I still need those
Re: SBR 20 supported round rails and bearing blocks
Why does great offers like this come up just after i have bought them a week before, if i had the storage i would buy them for my next build (if i could find space to build a second machine).
good luck with selling them someone is going to get a good deal.
Re: SBR 20 supported round rails and bearing blocks
I would be instrested, if you still have these for sale
If you do, please PM with details.
12 Attachment(s)
Re: SBR 20 supported round rails and bearing blocks
Re: SBR 20 supported round rails and bearing blocks
Happy New Year everyone! Just to say these are still available if anyone is interested. I will be putting them on eBay if not.
As you can see from the pictures there are a few superficial marks and light scratches on some of the carriage bodies and a ding on the corner of one. These were all there when they arrived from China (they have not been used). I don't think the ding will cause any issues and you won't even see it once bolted in place...
Re: SBR 20 supported round rails and bearing blocks
Hi,
can you give me offer with delivery to BT745HG ? Just decide to upgrade my EZ router 5X5 with rails, originals aren't so good.
Thanks
Re: SBR 20 supported round rails and bearing blocks
Re: SBR 20 supported round rails and bearing blocks
