I have looked at the wizards on my mach 3 but the engraving one is not there.
Do I need to do something to get it or where can I download a engraving plug in.
Printable View
I have looked at the wizards on my mach 3 but the engraving one is not there.
Do I need to do something to get it or where can I download a engraving plug in.
not sure of answer but look here, I think this has all the information you need
http://www.machsupport.com/shop/mach3-addons-for-mill/
Are you looking for "Write" the text engraving Wizard (last on the list) in the free Wizard menu?
What are you trying to engrave?
Quote:
Originally Posted by magicniner
Probably going to be text.
I have made some molds and would like to be able to engrave my name on the front and what the molds is.
but on my copy of mach3 in the wizards I do not have the engrave one.
Mine has one at the bottom of the Wizards list - called 'Write'. If you haven't got it you could try downloading it and re-installing.Quote:
Originally Posted by kell
Tnks guys found the write at the bottom, just need a good tutorial now
Here you go.
http://www.stevenson-engineers.co.uk/files/write.pdf
Well well well. Fancy seeing that packet of hobnobs again! Hi JohnQuote:
Originally Posted by John S
Ye and it's same packet because the Tight Old B''##rd won't part with them. .:whistle:Quote:
Originally Posted by JoeHarris
I know another one like that:hysterical:Quote:
Originally Posted by JAZZCNC
Well didn't like to say that about you Clive but seen has you've come out the closest I'll agree 100%. .:triumphant:Quote:
Originally Posted by Clive S