not sure dulux would cut it, especially watered down. ive got some mdf primer from wickes and its ok but not great

Quote Originally Posted by Lee Roberts View Post
If it was me I would spray the finish, dulux undercoat with dulux liquid gloss for the top coat. Thin them both down enough that they pass well through your spray system but also coat the job well, light sand in between coats and the job should turn out very nice.

With any paint job, the finish is a result of the prep, so on this, only you can decide what level of prep your willing to go to.

Edit/tip: Warm the paint up in the tin first as it makes it much easier to apply and with good spray gear you may not need any thinning.

.Me