Speeds and feeds for carbon fibre.

[Dean jeffery]

Cheers Nick I'm impressed with the out come, and doing this in ones garage compared to proper company's mine are and not been big headed are better.

TBH Nick the edge is fine no delam or nothing, I use what I thinks called a corn cutter.
The chassis plate needs a finish pass round the profile of the chassis plate, that's the big part in the pic only because a few bits are needed to be spot on.
But it does leave a tinny lip on the carbon and most would not bother TBH but a simple rub round the edge with some 1000 wet and dry removes it, or a simple deburr in a matter of seconds.

But the cutters I use Nick it's pointless even trying to regrind them mate, I can't even add cutter cost to parts theirs £120 of parts in the pic VS a 55 pence cutter the end mills are free :)

[Clive S]

Dean

found a cutter that works a treat and just 55p yes 55 pence

Would you be happy to share a link to the cutters. Nice work by the way.