Speeds and feeds for carbon fibre.

[Jonathan]

Screws where feasible, double sided tape where not.

[Dean jeffery]

Good post! Thanks...

how did you hold the carbon sheet? Screw and glue?

cheers, Billy

Sorry missed this post I used both DS tape plus screwed

[JAZZCNC]

Thanks for sharing

He didn't thank me other day when I snapped one while setting machine up. . .Lol

[Dean jeffery]

Lol Jazz that won't no cheapo Chinese cutter though, it was my one and only super plastic cutter :( been replaced by cheapo Chinese to compare

[Flyer]

Looks good Dean, I've just ordered some
How are you cutting the countersinks?

[Dean jeffery]

Sorry flyer I missed this :( I'm doing the countersinks with a coated carbide sim to this one eBay 222222270634 I use an 8mm bit 4 flute.

Machining then I use a profile method 3 passes, doing then in Z caused chattering and was slower :)

[Cosantoir]

Sure Clive

eBay item number 221965675192 don't let the Chinese put you off they came in around 6-8 days, and I'd bought 1 cutter from the UK and snapped in 55 seconds using the same speeds and feeds.

Hey can you provide a link or the name of the item ive searched this item number bit it doesn't show anything