. .

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. 03-07-2016 #1
    magicniner's Avatar
    Lives in Rotherham, United Kingdom.
    magicniner
    Last Activity: 05-05-2024 Forum Superstar, has done so much to help others, they deserve a medal. Has been a member for 9-10 years. Has a total post count of 2,021. Received thanks 230 times, giving thanks to others 42 times.
    Quote Originally Posted by vmax100uk View Post
    the controller was slightly different to the one in the pic, hence i connected a wire to the wrong terminal and blew the board.
    If they provided the wrong instructions for the supplied hardware and the instructions resulted in damage then surely they should replace the damaged parts FOC?
    You think that's too expensive? You're not a Model Engineer are you? :D
    Reply With Quote Reply With Quote
  2. 03-07-2016 #2
    John S's Avatar
    Lives in Nottingham, England, United Kingdom.
    John S
    Last Activity: 23-09-2017 Has been a member for 9-10 years. Has a total post count of 2,073. Received thanks 141 times, giving thanks to others 45 times. Referred 1 members to the community.
    Post a picture of the board.
    Those simple 3 axis boards are about £35 - £40 a pop and not 99 euro's but as said get them to replace it.
    John S -
    Reply With Quote Reply With Quote
  3. 03-07-2016 #3
    vmax100uk's Avatar
    Lives in Crawley, United Kingdom.
    vmax100uk
    Last Activity: 22-10-2018 Has been a member for 8-9 years. Has a total post count of 11.
    Ok will do once I've got it off the machine.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. NEW MEMBER: A new start for me.......
    By Nthkentman in forum New Member Introductions
    Replies: 4
    Last Post: 23-08-2014, 10:50 AM
  2. Where to start?
    By Inquisitor in forum Gantry/Router Machines & Building
    Replies: 7
    Last Post: 27-11-2012, 02:35 PM
  3. where to start?
    By trounce in forum Gantry/Router Machines & Building
    Replies: 44
    Last Post: 03-10-2011, 02:03 PM
  4. is this 2.5d where do i start? help please if you can
    By h4ppy-chris in forum General Discussion
    Replies: 4
    Last Post: 29-03-2011, 12:21 PM
  5. NEW MEMBER: Were do I start?!
    By tonygagey in forum New Member Introductions
    Replies: 4
    Last Post: 07-08-2010, 07:55 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules