Use a tile cutter as a hobby table saw?!!!

[HankMcSpank]

I can't seem to establish whether it's possible to adjust the height of the saw blade! That one I linked to on Tescos, clearly has a bevel/angle adjustment knob, but I can't see anything else (doesn't mean to say it hasn't got one).

Does your Wickes tile cutter come with a blade depth adjuster? (presumably it's very noisy too?)

Edit: BTW John...I can't find one of these for a tenner anywhere on Ebay?

[irving2008]

machine mart have a £50 150mm cutoff saw similar to the Silverline one but the problem with these small ones is the limited work size... 25 x 15mm

£80 gets you 50mm and £103 gets you 52mm work size... still not good enough for 60mm ali section

but £80 gets you 65mm as long as you can find a suitable blade for ali...

[Swarfing]

Unfortunately it does not have height adjustment as i suppose they don't expect you to cut anything thick than about 12 - 15mm which would max thickness of a floor tile.

[HankMcSpank]

Unfortunately it does not have height adjustment as i suppose they don't expect you to cut anything thick than about 12 - 15mm which would max thickness of a floor tile.

...& for that reason alone - I'm out.

(sorry, got the Dragon's Den on in the background!)

[Swarfing]

You weren't gonna buy one unless you had secured all of the knowledge...lol:heehee: