Thread: Plasma machine to laser?
-
14-07-2016 #1
Hi All
I've been running my homebrew plasma table for a couple of years now and I'm still really enjoying it, however, there looks like there could be a requirement to cut some 3mm birch ply.
What parts would I need to convert my plasma machine to a laser machine?
I've seen super fandangled cooling systems, power supplies, tubes and mirrors etc and I can't get my head around what is actually NEEDED.
I believe a 40w laser would do the task - can anyone confirm\reject this?
Should I decide to beef things up (laser wise) what is needed to cut say 6mm mdf? (in for a penny in for a pound!)
Any advice greatly received even if it is "don't bother buy a Chinese thingy"
ATB and many thanks
Danny
-
14-07-2016 #2
I am a firm believer in one machine for one process. So I would suggest you buy a cheap chinese laser cutter even if it is at 40W. I went with the 50W which was slightly dearer but had on board controls.
In terms of what you would need to convert a plasma to laser:
Powersupply £100
laser tube ~£300-500
optics £100
holders for the optics ~£100
Waterpump or chiller for the tube £10-500
fume extraction method £20-1000https://emvioeng.com
Machine tools and 3D printing supplies. Expanding constantly.
-
15-07-2016 #3
Thanks komatias
I must admit I am with you on the one machine per task. But for a first foray into laser I would be prepared to compromise for a short time.
Thanks for the break down that is fab.
Your 50w machine. ...What is the max thickness mdf it will cut?
This could be the way to go.
Cheers
Danny
-
15-07-2016 #4
Danny,
MDF is a shit material to laser. There are specific ones that work better though but the fumes they give off a sickening. During cutting the glue that holds the particles together melts and runs leaving a very ugly finish on the side. That is why laserply is better in general.
My machine can cut through 6mm laserply at 5mm/s and 4mm at 10mm/s at 56% power.
When it comes to pine, you can really blast through it with very little power as it is a less dense material. Have done up to 12mm pine but you do lose the crisp edge due to the beam being out of focus through most of the thickness.https://emvioeng.com
Machine tools and 3D printing supplies. Expanding constantly.
-
15-07-2016 #5
Thank you!
That's good to hear. Sound advice on the mdf. And a 50w seems to be more than enough. Now off to the boss (wife) for budget :-o
:-DLast edited by gr8fun; 15-07-2016 at 12:14 PM. Reason: Being polite
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
RFQ: 4 and 5mm steel plasma / laser cutting required, can send sheetcam files
By nobby in forum Projects, Jobs & RequestsReplies: 0Last Post: 29-04-2014, 12:36 PM -
RFQ: 5mm steel plate plasma or laser - can supply sheetcam g-code for mach 3,
By nobby in forum Projects, Jobs & RequestsReplies: 0Last Post: 07-03-2014, 07:56 PM -
FOR SALE: redsail c150 laser - ideal plasma conversion
By nobby in forum Items For SaleReplies: 3Last Post: 01-03-2014, 06:17 PM -
LIMAC knife cutting machine and plasma machine, cnc router latest video
By therouterlady in forum Manufacturer NewsReplies: 0Last Post: 18-09-2013, 05:28 AM -
WANTED: GCc Laser Pro or Epilog Laser Cutter Machine
By Brownhills school in forum Items WantedReplies: 1Last Post: 10-05-2012, 04:30 PM
Bookmarks