Threaded View
-
17-07-2016 #1
Hey guys, looks like i finished my new design, Hope someone can tell me whats is wrong.
The total machine size will be like 1400x1400mm and travel X/Y close to 1000x1000mm
Will be using 150x150mm steel tubing and will use screws (just need to weld in one place (where the X Ballscrew move the Y Gantry.
This machine will be used for woodworking. I already ordered hiwin rails for aluminium machine but the woodworking one will be the first that will build.
Image #4 display the unique two pieces that will welded together.
Any tip will be appreciated.
My metal working machine will be similar but will use 200x200mm instead 150x150mm in the Y Axis.
Tubing are close to 10mm and plates are 12,7mm!Last edited by samsagaz; 17-07-2016 at 12:13 AM.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
!Ewbie needs help with setting machine and work origins.p
By Moonshadow in forum General DiscussionReplies: 3Last Post: 04-05-2016, 10:30 PM -
Will steel angle work for a decent machine?
By amd7000 in forum Gantry/Router Machines & BuildingReplies: 13Last Post: 06-06-2015, 12:47 PM -
WANTED: Wanted: Small Metal Work Milling Machine
By 07trb in forum Items WantedReplies: 0Last Post: 04-03-2011, 06:58 PM -
Already built my machine.. but some pics of work etc
By Yohudi in forum Gantry/Router Machines & BuildingReplies: 5Last Post: 31-08-2007, 06:15 PM
Bookmarks