. .

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. 21-07-2016 #1
    AndyGuid's Avatar
    Lives in Pakenham, Melbourne, Australia.
    AndyGuid
    Last Activity: 2 Weeks Ago Has been a member for 9-10 years. Has a total post count of 215. Received thanks 34 times, giving thanks to others 303 times.
    Welcome to the forum Naftero.
    It sounds like you are already doing the best thing by learning from reading lots of DIY Router Build Logs.
    Eventually you will make your dreams of your DIY Build CNC machine a happy reality!
    Enjoy the journey!
    Reply With Quote Reply With Quote

  2. The Following User Says Thank You to AndyGuid For This Useful Post:

    Naftero
  3. 21-07-2016 #2
    routercnc's Avatar
    Lives in West Midlands, United Kingdom.
    routercnc
    Last Activity: 4 Weeks Ago Has a total post count of 1,737. Received thanks 412 times, giving thanks to others 76 times. Referred 3 members to the community.
    Welcome Naftero,

    I would avoid going straight to 3000mm x 2000mm as there is alot to learn and it gets expensive with larger machines. However, if you want to do that then post some pictures of your designs and you will get advice regarding ballscrew vs rack and pinion drive, how to get high feedrates, and appropriate drive electronics.

    Best of luck.
    Building a CNC machine to make a better one since 2010 . . .
    MK1 (1st photo), MK2, MK3, MK4
    Reply With Quote Reply With Quote

  4. The Following User Says Thank You to routercnc For This Useful Post:

« Previous Thread | Next Thread »

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules