Struggling with two items.

Spindle, doesnt like the one plugin. It works oddly if I disable the plugin but then not on restart of Mach. Ive tried the Matty Zee plugin, seems to work, the drive 'stops' if the start up speed is too high (I need to slow down the ramp time perhaps), and the motor speeds / what mach3 thinks its doing dont match. I dont have feedback on the motorspeed at the moment.

The main other issue is that Fusion CAD is putting some odd code in which is causing me to hit limits. The consensus is to use the Fanuc turning Post Proccesor. It works, no errors, but I get this:-

I'm less knowledgeable on turning code than milling however what I dont understand is why its moving to X33 in this line - N20 G0 X33. Z1.414. The way my lathe works is X is a negative number at the top and it should be moving to zero. So X-32 will be my current location when homed up top. This is a slant bed lathe, would this be correct? Ive tried to reverse the X direction in the setup on Fusion but gives me the same output.

%
O1001
N10 G98 G18
N11 G21
N12 G50 S6000
N13 G28 U0.


(FACE1)
N14 T1313
N15 G54
N16 M8
N17 G98
N18 G50 S3000
N19 G96 S200 M3
N20 G0 X33. Z1.414
N21 G1 X15.828 F1000.
N22 X13. Z0.
N23 X-1.6
N24 X1.228 Z1.414
N25 G0 X33.


(PROFILE1)
N26 M9
N27 G98
N28 G50 S3000
N29 G96 S200 M3
N30 G0 X33. Z1.345
N31 X14.968
N32 G1 X14.828 F1000.
N33 X12. Z-0.069
N34 Z-6.55
N35 X12.98
N36 X15.808 Z-5.136
N37 G0 Z1.404
N38 X13.828
N39 G1 X11. Z-0.01 F1000.
N40 Z-6.55
N41 X12.
N42 X14.828 Z-5.136
N43 G0 Z1.404
N44 X12.828
N45 G1 X10. Z-0.01 F1000.
N46 Z-4.775
N47 G18 G3 X11. Z-5.798 R1.3
N48 G1 Z-5.8
N49 X13.828 Z-4.386
N50 G0 Z1.404
N51 X11.828
N52 G1 X9. Z-0.01 F1000.
N53 Z-4.535
N54 G3 X10.5 Z-5.034 R1.3
N55 G1 X13.328 Z-3.619
N56 G0 Z1.404
N57 X10.828
N58 G1 X8. Z-0.01 F1000.
N59 Z-4.5
N60 X8.4
N61 G3 X9.5 Z-4.622 R1.3
N62 G1 X12.328 Z-3.208
N63 G0 Z1.404
N64 X9.828
N65 G1 X7. Z-0.01 F1000.
N66 Z-4.5
N67 X8.4
N68 X8.45
N69 X8.5 Z-4.501
N70 X11.328 Z-3.087
N71 G0 Z1.404
N72 X9.279
N73 G1 X6.45 Z-0.01 F1000.
N74 Z-4.5
N75 X7.5
N76 X10.328 Z-3.086
N77 G0 Z1.404
N78 X8.729
N79 G1 X5.901 Z-0.01 F1000.
N80 Z-4.5
N81 X6.95
N82 X9.779 Z-3.086
N83 G0 Z0.614
N84 X7.729
N85 G1 X4.901 Z-0.8 F1000.
N86 Z-5.
N87 X8.4
N88 G3 X10. Z-5.8 R0.8
N89 G1 Z-6.55
N90 X12.828 Z-5.136
N91 X13.838
N92 G0 X33.


N93 G28 U0. W0.
N94 M30
%

Thanks in advance.