Emco PC120 Turn

[Chaz]

Awesome thanks

[Chaz]

That should work well. Does it take much messing about with Mach3 to get this to work?

[cropwell]

I use P16 for coolant (just an air blower really) and P17 to turn the spindle on (Kress, not a three phase one with speed control)

You may like to play with active high / low and whether you connect to NO or NC on the relay as there can be some activity on the pins before Mach3 takes control.

Cheers,

Rob

[Chaz]

I use P16 for coolant (just an air blower really) and P17 to turn the spindle on (Kress, not a three phase one with speed control)

You may like to play with active high / low and whether you connect to NO or NC on the relay as there can be some activity on the pins before Mach3 takes control.

Cheers,

Rob

Thanks. Appreciated.

[Chaz]

So I ordered this one - https://www.shop-apt.co.uk/part-off-...2mm-shank.html. Its like 2mm too long but I can grind away some of the lip that's in the way. Kudos to APT for the quick delivery as usual.

[jamesgates1000]

Hi, does your lathe have a Baruffaldi TOE80 turret like on a denford cyclone?

http://www.1stmachinery.com/Resource.../1008_6790.JPG

Is so I have a few spare blocks and boring bar sleeves that i made up and also some spare ER25 and ER16 Holders that I bought and modified to suit the 25mm tool holder if you are interested

[Chaz]

Hi, does your lathe have a Baruffaldi TOE80 turret like on a denford cyclone?

http://www.1stmachinery.com/Resource.../1008_6790.JPG

Is so I have a few spare blocks and boring bar sleeves that i made up and also some spare ER25 and ER16 Holders that I bought and modified to suit the 25mm tool holder if you are interested

Nope, similar but not as 'angular' as that. Ill take some pics.