Well, its official. This board is so buggy that i am done with it. Take a look at the video how the relays are thinking they are controlling disco lights not an industrial machine. Meanwhile the machine is cutting. Thanks god that i took out the spindle control from the relay after dry testing.

I will contact them and all goes back to them. Will keep that board though as i have to repair the microscopic surface mount trimpot. At the end sb that runs Mach4 could use the board.





I jumped and bought the DDCSV1 controller. Will see how it goes. Seems promising. Its high time sb to check them out. I looked at some other ones but it seems they had some limit of file size. Not clear, crappy manuals. This one has a good manual . Meanwhile i will try to find english version manual of the more advanced and expensive mill controllers that could tap and so. Another bonus is my wife / on a vacation now/ works directly with chinese manufacturers so we would ask them what controls are they using on their mills.


John, please update us how the things are going with your controllers, maybe in a separate thread. you bought it for personal use or for integrating in machines ?