Quote Originally Posted by njhussey View Post
Hi and welcome to the forum!!



Well there's plenty of info on here for inspiring your build so you've come to a good place!!



Not ideal as will need machining to get a decent flatness but depending on what you want to cut (what do you want to cut?) will probably be ok.



Doubt you'll get 100x500 out of the dimensions you state, it's amazing how much room the gantry and Z axis take up. My machine is 1300x850 and I get 970mm x 500mm (just!) but that's because of the design I went for!



Generally motor kits are not matched very well, the motors tend to be high inductance and the PSU underpowered resulting in a slow machine. You're far better off buying separate items which the lads on here can recommend.....but only really worth doing that when you have a design up (which we'll happily critique) and say what you realistically want to cut.


Hi thanks for the advice, the router is to start off with just for me to get use to router/software as time goes by i hope to improve/modify ill will be only cutting MDF / ply and speed isn't a issue,

thanks mark