Ok... so i am in a bit of a struggle... i am not sure about my gantry beam.. i have not found a way to calculate deflection for the beam.. Iam not a strucural engineer ☺

So my beam is 940mm wide between the rail blocks. It is a 120h x80w x4t mm profile.

The maximum z extension is about 25cm on the tip of the tool.
Planned working extension maybe 15cm


The tool is extended about 15 cm.

Can sb point me to a tool to guestimate deflection based on real world cutting forces?

Is read on this forum cutting forces in any given direction do not exceed 400Newton? In soft metals.


I need this info to guestimate the total weight of the gantry and continue on to electronics selection...


Any help is welcome here.

Bert.

Verstuurd vanaf mijn SM-G7102 met Tapatalk