Roadrunner CNC

[nairepooc]

Hi Roadrunner,

Nice looking build you have going on there.
I am almost in the same level of components (electrical wise)
1 x CP0-10V BOB
4 x Nema 23 4Nm steppers
4 x CW5045 Drivers
2 x 36V PSU
1 x UC300 motion controller
1 x 24V PSU (Safety circuit)
1 x 5V PSU (BOB etc)

Did you by chance purchase through CNC4YOU?

I also have the same issues with CAD, I am a mech engineer and pencil and paper are what I know, but I guess we both need to brush up on CAD.
I am looking at FreeCAD its looking good so far.

Will enjoy watching your build as it might be in tandem with my own build.
ATB,
Ian

[Roadrunner]

Hi Ian

Many thanks on the comments and yes bang on with the supplier really helpful and good quality stuff.

As for the CAD software I have been tinkering with Fusion 360 it works on Microsoft and Mac my favourite platform.

The software is free to hobbyist's and has built in CAM to boot so will experiment with that.

Feel free to ask away if I can help I will do my best to get you an answer

Regards Steve

[Roadrunner]

Things have moved on a bit since I last posted we have been evicted from the warm lounge now to the final resting place well the machine has ................I think hehe.

Water cooled spindle was definitely the best choice for noise level!

Still need to finalise the limit stop positioning but getting very close to actually starting my first project.

[Roadrunner]

Well its not very detailed but for a 6mm ball ended cutter im happy with the initial results.