. .
Page 2 of 3 FirstFirst 123 LastLast
  1. 19-03-2019 #11
    Lee Roberts's Avatar
    Lives in Milton Keynes, United Kingdom.
    Lee Roberts
    Last Activity: 5 Days Ago Forum Superstar, has done so much to help others, they deserve a medal. Has been a member for 9-10 years. Has a total post count of 2,977. Received thanks 240 times, giving thanks to others 808 times. Made a monetary donation to the upkeep of the community. Referred 11 members to the community.
    Husky what happened next?
    Lee
    Reply With Quote Reply With Quote
  2. 05-05-2020 #12
    Husky1's Avatar
    Lives in Ljubljana, Slovenia.
    Husky1
    Last Activity: 12-07-2022 Has been a member for 9-10 years. Has a total post count of 36. Received thanks 1 times, giving thanks to others 0 times.
    Quote Originally Posted by Lee Roberts View Post
    Husky what happened next?
    made some upgrades, here is recent: 7.5kw 24rpm eurospindel with other improvements. Steel table is not done yet but i might consider integrated turning table instead of that turning chuck.

    Click image for larger version.  Name: received_690627888363846.jpeg  Views: 709  Size: 44.1 KB  ID: 28062
    Last edited by Husky1; 05-05-2020 at 11:02 PM.
    Reply With Quote Reply With Quote
  3. 20-06-2020 #13
    Husky1's Avatar
    Lives in Ljubljana, Slovenia.
    Husky1
    Last Activity: 12-07-2022 Has been a member for 9-10 years. Has a total post count of 36. Received thanks 1 times, giving thanks to others 0 times.
    Quite a difference, hope it goes well too. DIY BT30 setup is for sale if anyone is interested.

    Click image for larger version.  Name: IMG_PIT_20200618_122346_50.jpg  Views: 667  Size: 1.44 MB  ID: 28427
    Reply With Quote Reply With Quote
  4. 30-07-2020 #14
    Husky1's Avatar
    Lives in Ljubljana, Slovenia.
    Husky1
    Last Activity: 12-07-2022 Has been a member for 9-10 years. Has a total post count of 36. Received thanks 1 times, giving thanks to others 0 times.
    My new spindle up and running.

    Reply With Quote Reply With Quote
  5. 30-07-2020 #15
    JAZZCNC's Avatar
    Lives in wakefield, United Kingdom.
    JAZZCNC
    Last Activity: 19-01-2024 Forum Superstar, has done so much to help others, they deserve a medal. Has been a member for 9-10 years. Has a total post count of 8,446. Received thanks 1,445 times, giving thanks to others 109 times.
    You cut anything with it yet Mat.?
    -use common sense, if you lack it, there is no software to help that.

    Email: [email protected]

    Web site: www.jazzcnc.co.uk
    Reply With Quote Reply With Quote
  6. 30-07-2020 #16
    Husky1's Avatar
    Lives in Ljubljana, Slovenia.
    Husky1
    Last Activity: 12-07-2022 Has been a member for 9-10 years. Has a total post count of 36. Received thanks 1 times, giving thanks to others 0 times.
    Had some issues with pneumatic valve so i made only test cuts so far. But what it does it is next level.
    Reply With Quote Reply With Quote
  7. 09-06-2022 #17
    Husky1's Avatar
    Lives in Ljubljana, Slovenia.
    Husky1
    Last Activity: 12-07-2022 Has been a member for 9-10 years. Has a total post count of 36. Received thanks 1 times, giving thanks to others 0 times.
    Small upgrades.

    Last edited by Lee Roberts; 12-10-2022 at 09:33 PM. Reason: Added vid
    Reply With Quote Reply With Quote
  8. 10-06-2022 #18
    Lee Roberts's Avatar
    Lives in Milton Keynes, United Kingdom.
    Lee Roberts
    Last Activity: 5 Days Ago Forum Superstar, has done so much to help others, they deserve a medal. Has been a member for 9-10 years. Has a total post count of 2,977. Received thanks 240 times, giving thanks to others 808 times. Made a monetary donation to the upkeep of the community. Referred 11 members to the community.
    Looking good !
    Lee
    Reply With Quote Reply With Quote
  9. 30-06-2022 #19
    Husky1's Avatar
    Lives in Ljubljana, Slovenia.
    Husky1
    Last Activity: 12-07-2022 Has been a member for 9-10 years. Has a total post count of 36. Received thanks 1 times, giving thanks to others 0 times.
    Here are some test cuts and accuracy. I am quite happy with the outcome.

    Last edited by Lee Roberts; 12-10-2022 at 09:36 PM. Reason: Added Vid
    Reply With Quote Reply With Quote
  10. 01-07-2022 #20
    routercnc's Avatar
    Lives in West Midlands, United Kingdom.
    routercnc
    Last Activity: 3 Weeks Ago Has a total post count of 1,751. Received thanks 415 times, giving thanks to others 77 times. Referred 3 members to the community.
    Nice work. The rigidity of the machine is really showing on the surface finish.
    Building a CNC machine to make a better one since 2010 . . .
    MK1 (1st photo), MK2, MK3, MK4
    Reply With Quote Reply With Quote
Page 2 of 3 FirstFirst 123 LastLast
« Previous Thread | Next Thread »

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. BUILD LOG: Finished builds picture menu
    By routercnc in forum DIY Router Build Logs
    Replies: 9
    Last Post: 05-12-2021, 12:28 PM
  2. Drill / Tap Guide Jig - Finished!
    By Wal in forum Metalwork Project Showcase
    Replies: 10
    Last Post: 04-12-2014, 09:59 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules