Mach3 VFD control via Modbus using brain file

[visedge]

I see...
Perhaps you can't fix it Screen4, or it is not no. 39 but something else, I don't know. I used the standard screen.

I'm using the 2010 Screenset so the original Mach script editor doesn't work with the 2010 set. I have however found a way to change the DRO no. to 1002. I've used 'MachScreen' to do it, you can see where to edit it when you open the screen file, goto -> view -> overview. Here you can see an overview of all the DRO's LED's & Buttons etc. All the values can be edited here on-the-fly. So I've made the changes to the screen but I will not know if it is working until I get in to work tomorrow. I will let you know how it goes...

[A_Camera]

I'm using the 2010 Screenset so the original Mach script editor doesn't work with the 2010 set. I have however found a way to change the DRO no. to 1002. I've used 'MachScreen' to do it, you can see where to edit it when you open the screen file, goto -> view -> overview. Here you can see an overview of all the DRO's LED's & Buttons etc. All the values can be edited here on-the-fly. So I've made the changes to the screen but I will not know if it is working until I get in to work tomorrow. I will let you know how it goes...

Cool. I hope you get it up working as it should.