Magnetic Fixings & buffers

[Laurie]

Brilliant - will get on that! Thanks, L.

[Robin Hewitt]

Never tried it, do you have a problem with swarf removal?

[Billythefish]

And if you dont want to use a blow lamp just leave the job in a tub of acetone over night...

[magicniner]

Never tried it, do you have a problem with swarf removal?

Robin, cleanup is a breeze, you just flip the lever to "OFF", vacuum and wipe clean,
Regards,
Nick

[Laurie]

Robin, further to Magicniner's response to below - we do very little roughing, and it's almost very light passes of a ball nose mill at a high spindle speed: so far what swarf remains on the workpiece until we flip the lever on the holding plate isn't proving a problem. So far...!