Thread: PC Upgrade Options?
-
31-08-2016 #11
-
31-08-2016 #12
The 3 axis i bought for 165$. What is not clear if one axis could be mapped as circular, its clear that on the 4 axis controller that could be done, the 4rth axis is rotational. What is not clear there is if on the 4rth axis 2 axis could be slaved together for my type of machine and change type of 4rth axis. I reread the manual, but that is not explained. I guess that the controller has to be in my hands so i know for sure.
Now the more expensive ones have dedicated ones for lathe, so they could do a lot of stuff. Like the one John bought. They are more expensive and if working, i believe quite worth the money. At the end these controllers should work, as all advanced chinese machines have them fitted.
By the way i think GSK may be the real manufacturer of the more complex controllers https://issuu.com/pandaweb/docs/2012...r_introduction ignore the GSK infront of number, thats how you find them on aliexpress to check prices. I think one of these bought from a reputable seller that could provide support in English could be a nice thing.
In both cases cheap or expensive, its worth trying i believe.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
ATC Options?
By Davek0974 in forum Gantry/Router Machines & BuildingReplies: 25Last Post: 14-05-2016, 08:25 AM -
Linear bearing upgrade options?
By Joe in forum Rails, Guideways & BearingsReplies: 10Last Post: 04-03-2015, 09:22 PM -
advise options needed on laser upgrade/add on
By george uk in forum Laser Machines & BuildingReplies: 9Last Post: 19-07-2014, 10:54 PM -
Profile Cutting Options BobCAD CAM
By aldepoalo in forum BobCAD-CAMReplies: 4Last Post: 25-06-2013, 09:10 PM -
Machine rebuild time - options...
By CraftyGeek in forum Gantry/Router Machines & BuildingReplies: 28Last Post: 19-10-2011, 10:26 PM
Bookmarks