-
01-09-2016 #1
There are several questions and comments on Coolants and Cutting Oils and they are quite old.
If anyone has a question on Coolants etc, do feel free to ask. I do not know how many there are likely to be, but we will cross that bridge.
Many people will be getting into problems, or potentially will be and from what I see in the threads, there is so little information available unless actually working in an environment where someone has a working knowledge even then, in the professional workplace, correct use of the products are often overlooked or even unknown.
I have worked in the Lubricants Industry all my working life (now retired) and manufactured Coolants and speciality Lubricants.
I would be pleased to advise on any problems you have and are likely to encounter and how to correct them, well, as best I can!.
Richard Hallett
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
4mm MDF cutting on CNC...Advice please
By Nthkentman in forum Woodwork DiscussionReplies: 6Last Post: 19-08-2014, 12:22 AM -
Font cutting
By petesos in forum Machine DiscussionReplies: 9Last Post: 17-05-2014, 08:14 PM -
Cutting Ply/MDF
By Leadhead in forum Wood Finishing Tips & TricksReplies: 3Last Post: 02-10-2013, 01:59 PM -
Cutting Perspex?
By Shinobiwan in forum Machine DiscussionReplies: 7Last Post: 19-02-2013, 09:25 PM -
The cutting fun begins
By m.marino in forum Machine DiscussionReplies: 2Last Post: 01-04-2012, 12:35 AM
Bookmarks