Thread: Evening All
-
05-09-2016 #1
Hi All,
I'll be honest I'm not very good at this sell yourself bit but here goes..
I'm Rich from Newcastle and well I stumbled upon your site tonight and thought I would come over and see if I could pick some peoples brains on the cnc side of things and maybe offer some help on the PC side of things.
I've been a cnc newbie for years with my little Roland PNC2300A until now when I'm ready to join the big boys with a new OXCNC machine in a week or 2 (unless I'm warned off??).
Anyway, thanks for having me and hope to get to know a few of you as we go.
-
06-09-2016 #2
Hi Rich,
Welcome to the forum! There's plenty of experienced CNC'ers on here (I don't claim to be one of them by the way!!) for you to pick the brains of. There's no such thing as a silly question, the only silly question is the one you don't ask!! The OXCNC might be OK for you, but depends on what you want to do with it as it's not the stiffest machine in the world
-
06-09-2016 #3
Would that be this Ox CNC kit?
http://ooznest.co.uk/3D-Printer-CNC-...FUMo0wod7OMNPQ
-
06-09-2016 #4
Thats the one Robin, I was looking at the 1500mm*1500mm version and was going to drop a dewalt unit in it.
-
06-09-2016 #5
-
06-09-2016 #6
Yeah thats the one Robin, 1500mm*1500mm with plans to stick the dewalt router on it.
-
06-09-2016 #7
-
06-09-2016 #8
-
06-09-2016 #9
Thanks Jazzcnc,
Any recomendations for less than £1500?
-
06-09-2016 #10
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
NEW MEMBER: Evening All from Aylesbury
By RocketBoy in forum New Member IntroductionsReplies: 0Last Post: 19-06-2016, 09:50 PM -
NEW MEMBER: Evening all
By 9designs in forum New Member IntroductionsReplies: 6Last Post: 25-11-2014, 06:52 AM -
NEW MEMBER: Good evening all.
By monza in forum New Member IntroductionsReplies: 2Last Post: 28-12-2009, 08:53 PM -
NEW MEMBER: Good evening.
By itbookham in forum New Member IntroductionsReplies: 1Last Post: 18-11-2009, 08:46 PM -
NEW MEMBER: Evening all.....
By HiltonSteve in forum New Member IntroductionsReplies: 9Last Post: 14-05-2009, 02:40 PM
Bookmarks