Good Morning Clive

Thank you for the reply.

My Build Log is here http://www.mycncuk.com/threads/7936-...3396#post83396

although not so much building has happened just lately after the arrival of our new baby girl although I occasionally get to the garage for a few minutes.

Being a silly billy I originally bought the SBR20 rails and ballscrews 1605's from Aliexpress and then researched after which I now realise wasnt the way but a good learning curve I have nearly got my frame and because of the time taken I don't want to come out with a second rate machine.

The parts I have are 1000mm SBR20, 500SBR20,& 300MM SBR20 Rails and the ballscrews to go with them I though I would sell the rails but keep the screws and then come out with a better machine its all that deans fault

I will have a look through cnc4you
I need to go through the logs of the machines for the electronics because I havn't really been working on that part but it's difficult to know where to start And I don't want to get it wrong this time.


thank you

Rob