Changing to Hiwin design from round supported parts advice grateful.

[JAZZCNC]

Not that easy to figure out who he aimed at, is it?

Yes it is Mike was talking to Rob the OP who knows me by name. He clearly wasn't directing it at you or questioning your suggestion but merely reminding Rob what had been said to him by me. Which Rob acknowledged two posts later and before you felt the need to reply.! . . Hence why I wondered why you replyed in the manner you did.

[grain_r]

Good Evening Guys

Thank you very much for the replies. I didn't know about the other type of couplers and so Thank you. Although Because I will go with the Pulleys then it will be changeable on the speeds and torque (Although thats another learning curve for the maths )

Thanks dean Yes your right Its the problem when I get started I buy and then it sits there waiting for me for ages and I would have been better to learn and then buy after so thank you very much for slowing me down. Although where were you when I brought my AC cobra replica . still not bad that's only sat there for 7 years i'm sure they get better with age well that's if it worked.

I will got through the Logs and start to learn and do it properly I didn't really know where to start so the thread is great with the suggestions on the items that are best to look towards.

I have just come in from the Garage and still working on the frame although that is looking a bit more than box section now but only just.

I didn't have your details previously dean but if you don't mind me speaking to you at some stage when you have a minute it would be gratefully received.

Thank you all as usual for all the help you give

Thanks

Rob

[JAZZCNC]

I didn't have your details previously dean but if you don't mind me speaking to you at some stage when you have a minute it would be gratefully received.

Speak to so many people I forget who just seem to think I'd spoke to you some time ago.? But could easily be some other Rob.!!

I'll PM you my number.

[grain_r]

Hey Dean

Brilliant Thank you that will be great. We've only spoken on the forum so it must have been another Rob.