mach 3 scaling issue

[terry1956]

hi, this is on the proxxon mill, not the sieg mill. I was hoping to make the mounting plates on the proxxon. will reload mach3 today, and see what happens.

[Neale]

hi, this is on the proxxon mill, not the sieg mill. I was hoping to make the mounting plates on the proxxon. will reload mach3 today, and see what happens.

Sorry - all bets off, then! Good chance that the 54mm/56mm means that steps per unit settings are wrong but this doesn't explain why the gcode doesn't do as expected. Let's see what a Mach3 reload does for things.

[stirling]

Any chance you're using an "exotic" license?