-
21-02-2018 #261
-
22-02-2018 #262
Hi Boyan,
Thanks that worked! I dont need to use Gcode ATC or Gcode ARC?
I have another question, maybe you can help. Im now using Aspire, and it was working very well, however when drawing in the program the Y Direction of my machine was wrong, so my parts were coming out mirrored on the Y Axis.
So i changed the parameters and wiring to flip the Y Direction and make it home to the Positive, and move in the negative (Because my home position is top left).
After changing everything, the machine moves correctly, and homes correctly. Aspire is generating the code correctly (Making Y move in the Negative direction and not the positive), however now the controller refuses to run the code.
I am pulling my hair out trying to figure out what the problem is.
Any help would be appreciated.
Alex
EDIT: The problem above magically fixed itself.....Last edited by AlexDoran; 22-02-2018 at 05:12 PM.
-
27-03-2018 #263
Have anyone tried the find center function on the DDSCV1.1? Also wondered if anyone have tried writing macros for it yet?
-
08-04-2018 #264
Never knew about a "Find Center function". How is it invoked.
I have written a test sub-routine:
(Safe Block)
G17 G21 G90 G54 G40 G49 G80
(Investigate Subroutines)
(set initial X, Y and Z)
G01 X0.0 Y0.0 Z0.0 F100
#1 = 3.888
G01 Z2.0
G01 X FIX[#1]; Round Down
G01 Y FUP[#1]; Round Up
G04 P5000; Little delay
(Note the above has nothing to do with testing the subroutine mechanism!!)
M98 P456 L3; Call subroutine 3 times
M30; End main Program
%
(Declare the Sub)
O456
G91
G01 X2.0 F50
G90
G04 P3000; Little delay
M99; End of Sub
%
-
08-04-2018 #265
The find center function can be used by redefining the start button. It can be set in parameter #446
-
13-05-2018 #266
Hi,
First post - and I'm sorry if this is not an appropriate location/method of seeking advice.
I have recently completed the conversion of a Sieg Mini Mill and am using the DDCSV1.1 controller (Madmodder Flashed).
Surprisingly - everything seems to be working and a test gcode sample appears to be doing what I had hoped it would. I have yet to cut any metal with it but that will happen soon I hope.
There is one aspect of the function of the controller that is currently bugging me - that is the Homing Function.
I have proximity limit switches on all the axis and they appear to be functioning properly - but when I invoke the Homing Function the following happens:
Z comes down to limit switch then goes up to upper limit and stops (Unit displays "Z-axis pos limit trig'd")
Then
X moves to neg limit switch then goes back to pos limit and stops (Unit displays "X-axis pos limit trig'd")
Then
Y moves to neg limit switch then goes back to pos limit and stops (Unit displays "Y-axis pos limit trig'd")
leaving all axis at positive limit.
Is this whats supposed to happen? The values on the DDCSV do not reset and the axis do not back off the limits. Is this whats supposed to happen?
I would be very grateful for any advice.
L_Ward
-
14-05-2018 #267
-
14-05-2018 #268
Thanks for the reply Boyan. Managed to sort things out. Homing OK now.
Thread Information
Users Browsing this Thread
There are currently 2 users browsing this thread. (0 members and 2 guests)
Similar Threads
-
CSLAB CSMIO/IP-M 4-axis Ethernet Motion Controller
By dudz in forum CS-Lab (CSMIO)Replies: 35Last Post: 02-01-2017, 01:27 AM -
FOR SALE: Galil Motion Controller - PCI DMC 1842 - four axes
By lateAtNight in forum Items For SaleReplies: 1Last Post: 24-06-2014, 03:41 PM -
FOR SALE: Galil 1880 8 axis PCI motion controller
By Boyan Silyavski in forum Items For SaleReplies: 1Last Post: 03-06-2014, 07:39 PM -
Advice please! JAF Motion Controller issues!
By Mark Chard in forum Machine Control SoftwareReplies: 0Last Post: 31-01-2014, 05:03 PM -
eBay: Galil DMC-1580 Motion Controller 8-Axis
By Boyan Silyavski in forum Items On eBay UKReplies: 1Last Post: 25-12-2013, 10:30 AM
Bookmarks