DDSCV1.1 3 and 4 axis offline motion controller

[AlexDoran]

Hi Boyan,

Thanks that worked! I dont need to use Gcode ATC or Gcode ARC?

I have another question, maybe you can help. Im now using Aspire, and it was working very well, however when drawing in the program the Y Direction of my machine was wrong, so my parts were coming out mirrored on the Y Axis.

So i changed the parameters and wiring to flip the Y Direction and make it home to the Positive, and move in the negative (Because my home position is top left).

After changing everything, the machine moves correctly, and homes correctly. Aspire is generating the code correctly (Making Y move in the Negative direction and not the positive), however now the controller refuses to run the code.

I am pulling my hair out trying to figure out what the problem is.

Any help would be appreciated.


Alex

EDIT: The problem above magically fixed itself.....