Hybrid View
-
15-09-2016 #1
These controllers are going to be a game changer for the many people sat on the fence telling themselves CNC is too hard to get into.
John S -
-
16-09-2016 #2
These look great, what Lathe/Mill Post Processor is required to generate code for them?
Most similar things I've seen claim "Standard G-Code" but then don't mention which easily available Post Processors produce "Standard G-Code" as all the PPs I've found have a manufacturer/machine/controller designation.
Mach3 developers had the good grace to work close to a standard for a popular industrial controller rather than a paper standard to which no manufacturer quite adheres.
Never underestimate the incapability of the masses, there's still all those scary wires to connect ;-)
- NickYou think that's too expensive? You're not a Model Engineer are you? :D
-
16-09-2016 #3
That's the big question before jumping to conclusions
What i found till now:
- Post processor for mach3 definitely does not work, as you could see in second video it runs away from the job coordinates. Who cares, me not. I could save my programs again in the proper format
-It doe not recognise manual tool change code also. So jobs have to be split. Not big deal
-Does not recognise G20 and G21, so program must be in mm to begin with. No problem so far.
-Will run properly G code as of the Gcode and fanuc output from Aspire. Though program was simple. / See video2/ .
As i have not connected it yet to a machine i can not say more. But there is a good chance that all goes fine.
-
16-09-2016 #4
-
16-09-2016 #5
This is a basic controller. The much more expensive Chinese controllers not only do all but close the loop also, at least the most expensive ones, which makes them really industrial
funny, i see now that it supports G20 and G21 but when i was testing it ?, so maybe i made a mistake somehow with the file. Will check again
That's what it supports.
-
16-09-2016 #6
-
17-09-2016 #7
I'm just trying to get a feel for whether it's a direction in which I should move, it does look like a great first foray into CNC solution, but given that I'm already au-fait and comfortable with Mach's Mumbo Jumbo I was looking for a step up rather than a step sideways and possibly down.
Although I've yet to have a PC fail I have upgraded my controller machine a few times to the point where it will hapily run my CAD/CAM. One very nice feature with Mach3 is that for approximately £60 I am able to have a fully configured, 100% functional backup PC with a new HDD on the shelf and any keyboard or monitor from my other systems can replace the ones on the CNC in the event of failure.
With any luck these all-in-one boxes will take off in the starter CNC market and grow with their customer base to offer enhanced capabilities,
- NickYou think that's too expensive? You're not a Model Engineer are you? :D
-
17-09-2016 #8
NIck, its true if all is working as its meant. Reality have shown otherwise.
For example:
Right now in machine i have LPT board from my old machine that was working perfectly there. But not here. Now probe will not work , spindle output will not work with correct PWM, from that results that my mach3 screen /MachStdMill / is not working 100%. All that why? because board is near the servo drives in the box, and not so near mind that.
But hey, before that i had the Pokeys that is Ethernet and 24v powered but 5v on inputs and outputs, so what? Same problems. Wait, i had the galil 8 axis board/ 600euro second hand/ even before that, but no support,DIY plugin and communication with pc good for the 80ies...and so on.
Do you know how much time i spend playing with boards and make them work? And when i did sometimes, it happens that after Ethernet board i had to change back to x86 windows, cause-hey mach3 will not work on a x64 machine with LPT. When all was fine then PC crashed ... I have 3 PCs for that purpose and thought like you think.
I would have bought one of the CSMIO rigth from the start , 24vdc, shielded, etc. But they made them so that they don't work with MachStdMill +the cheap one would not square at homing and is not so cheap at 300 euro. And the other one is quite steep at 800euro. And at that moment i cared about that, because i love that screen.
Now i care only to start machine and to work. What i am saying is that for a production, even if its home production, most important is when you start the machine -to work 100%. And yes, i could say the same- controller burns and i put another one inside it, program it for 1/2 and thats it. is not that the same?
In other words if i was happy with a combo for which i have payed 200 euro for software and 100-800euro for hardware, Why on earth would i be researching other possibilities and reading Chinglish manuals?
FIY i am looking now at the "next step" as you say it. So the answer is: yes there is, but not for 150 euro from china like the one we are discussing here. For the moment i have narrowed things to 980-990MDc overview and manual , there are even better ones - 1000 and 1500, but are priced near the model numbers and i think are out of scope for normal retrofit or DIY machine.
-
The Following User Says Thank You to Boyan Silyavski For This Useful Post:
Thread Information
Users Browsing this Thread
There are currently 4 users browsing this thread. (0 members and 4 guests)
Similar Threads
-
CSLAB CSMIO/IP-M 4-axis Ethernet Motion Controller
By dudz in forum CS-Lab (CSMIO)Replies: 35Last Post: 02-01-2017, 01:27 AM -
FOR SALE: Galil Motion Controller - PCI DMC 1842 - four axes
By lateAtNight in forum Items For SaleReplies: 1Last Post: 24-06-2014, 03:41 PM -
FOR SALE: Galil 1880 8 axis PCI motion controller
By Boyan Silyavski in forum Items For SaleReplies: 1Last Post: 03-06-2014, 07:39 PM -
Advice please! JAF Motion Controller issues!
By Mark Chard in forum Machine Control SoftwareReplies: 0Last Post: 31-01-2014, 05:03 PM -
eBay: Galil DMC-1580 Motion Controller 8-Axis
By Boyan Silyavski in forum Items On eBay UKReplies: 1Last Post: 25-12-2013, 10:30 AM
Bookmarks