These look great, what Lathe/Mill Post Processor is required to generate code for them?

Most similar things I've seen claim "Standard G-Code" but then don't mention which easily available Post Processors produce "Standard G-Code" as all the PPs I've found have a manufacturer/machine/controller designation.

Mach3 developers had the good grace to work close to a standard for a popular industrial controller rather than a paper standard to which no manufacturer quite adheres.

Quote Originally Posted by John S View Post
These controllers are going to be a game changer for the many people sat on the fence telling themselves CNC is too hard to get into.
Never underestimate the incapability of the masses, there's still all those scary wires to connect ;-)

- Nick