DDSCV1.1 3 and 4 axis offline motion controller

[JAZZCNC]

I start to feel after reading a coupler of control manuals that its important what speed USB pen drive or card is fitted there, hence they sell the controller with certain USB card .

What you make of that / that's the 1000 series controller/:

l Be able to process up to 1000 blocks of program per second, which makes the high-speed & mini-line cutting available.
l Equipped with U-disk port through which CNC systems provide the following functions: store and recover systems’ software and machining data, perform DNC machining by executing a program in U-disks.


U disc must be USB disc/ In Chinglish/

Boyan I never assume anything.! . . . More important I take what is written with pinch of salt, esp if written by the Chinese.! Which is why I have box full of cards etc.

When I get hold of the controller and fitted to working machine I'll give report back.

To answer your question from before the reason for the 1000 series was because I asked for controller best suited to Router and this was recommended.