DDSCV1.1 3 and 4 axis offline motion controller

[JAZZCNC]

This below works for changing tools / generated by ESTLCAM/, cant remember if it stopped the spindle?



(No. 2: Part 1)
M05
M00 (Change tool: End mill 6mm 2 flute)
M03

Not really tool change that it's just stopping the code. There must be way to do this correctly thru macros and/or controller parameters so can call offsets etc without having to mess around writing Cam post processors just for this controller. If not then it's Doomed to the box under bench straight away.!!

I've been thru all the files and translated them and can't see any param's or Code relating to tool changing. Here's the files translated.